Stabilizer is one component of the suspension system that serves to reduce the slope of the vehicle due to centrifugal force when the vehicle turns, stabilizer also serves to improve traction tires. For the front suspension, stabilizer usually installed on both the lower arm through the rubber pad and linkage. At the center of the belt to the frame or body in two places through the bushing.
How Stabilizer Bar Work
When the vehicle turns, the spring rod outer (Outer Spring) and spring depressed inner wheel (Inner) expands, the result stabilizer bar will be twisted because one end is pressed upward and the other end to move downwards. Stabilizer bars tend to hold against torsion, torsion Detainees against this serves to reduce body roll and maintaining the body in a safe slope limits.
How to overhaul Stabilizer Bar
* Tools Used :
1. Tool Box
2. Socked wrench
3. jack
Work Safety
* Do not remove the stabilizer, if the suspension is not free.
Work step
Dissasemble Instruction
• Lift the car and give support to the frame / body
• Remove the retaining screw stabilizer rod on the lower arm suspension
• Remove the rubber pad and retaining ring
• Tick the stabilizer rod, not to overturn
• Remove clamp rod stabilizer
• Remove the stabilizer rods and rubber pads
• Remove the retaining screw stabilizer rod on the lower arm suspension
• Remove the rubber pad and retaining ring
• Tick the stabilizer rod, not to overturn
• Remove clamp rod stabilizer
• Remove the stabilizer rods and rubber pads
Inpect :
* Stabilizer rod
• Wear and tear at the edges, excessive thirst, replace!
• Cracks and crookkedness stabilizers bar
* Stabilizer rod
• Wear and tear at the edges, excessive thirst, replace!
• Cracks and crookkedness stabilizers bar
* Wear at the edges When excessive thirst, replace.
The assemble instruction
• Give a little silicone grease on the bushings rubber pads.
• install the stabilizer to pay attention mark at the stabilizer bar as before
• Stabilizers bar must be perpendicular to the bolt holder on the lower arm of the suspension.
• Step of stabilizer bar assemble is the reverse of disassembly.
Assemble instructions For New stabilizer on Aksel Rigid
• Cars in lifted up position
• Install stabilizers bar on Aksel
• Install the holder bolt on the frame, holder bolt must be straight down.
-----------
The assemble instruction
• Give a little silicone grease on the bushings rubber pads.
• install the stabilizer to pay attention mark at the stabilizer bar as before
• Stabilizers bar must be perpendicular to the bolt holder on the lower arm of the suspension.
• Step of stabilizer bar assemble is the reverse of disassembly.
Assemble instructions For New stabilizer on Aksel Rigid
• Cars in lifted up position
• Install stabilizers bar on Aksel
• Install the holder bolt on the frame, holder bolt must be straight down.
Assemble instructions For New stabilizer on Independent Suspension
• Cars in lifted up position
• Install stabilizer bar first and then and install holder bolt at the lower arm suspension like to Aksel such as instalation on rigid axle. -----------
Nice Post. Thanks for Sharing
ReplyDeletesuspension parts manufacturers in India
Best Automobile Part Manufacturers in India
Shock Absorber Manufacturers in India
Brake Shoe Manufacturers in India
Brake Manufacturers in India
Car Suspension Parts Manufacturers in India
Universal Joint Cross Manufacturers
Bearing Manufacturers
Brake Shoe Manufacturers
Wiper Blades